Turning off: If you need to stop using your pump for a period of time, you can place the pump in storage mode by following these steps:
- Place the Tandem Mobi pump on the charging pad.
- Press and hold down the Pump button for approximately 20 seconds. The pump will beep 3 times before going into storage mode.
- Remove the pump from the power source.
- Keep the pump protected when not in use.
Turning on: To bring the pump out of storage mode, follow these steps:
- Place the pump on the charging pad.
- Press and hold the Pump button for approximately 5 seconds. The pump will beep four times and the pump status lights will flash green four times. If the pump was in storage mode for an extended amount of time, it may take longer than usual for the pump to turn back on.
Note: All of your Personal Profile information will be saved while your pump is off, but your IOB will be set to 0. You will need to complete the load process in order to resume delivery.